Driver for Solaris

Driver Version 6.20j  

OS Versions: Solaris 8, 9 and 10 (32-bit and 64-bit)

Note This driver version requires patch #112438 for
Solaris 8 operation.

Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.

Compatible HBAs: LPe11002, LPe11000, LP11002, LP11000, LP10000DC, LP10000, LP9802, LP9802DC, LP9402DC, LP9002C, LP9002S, LP9002DC, LP9002L, LP9000, LP8000S, LP8000DC and LP8000

Solaris 10 Update 1 behavior change -- must read before downloading driver
Driver kit - Base driver, HBAnyware utility 3.3a22 and lputil 2.0a13 (21.5 MB tar file)
Driver Manual - LPFC Driver for Solaris User Manual (1.67 MB)
HBAnyware Manual - HBAnyware Utility User Manual (3.27 MB)
lputil Manual - lputil Utility User Manual
(325 KB)
FCA
Utilities - emlxadm version 1.01a and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
FCA Utilities Manual - Installing the FCA utilities (1.6 MB)
FCA Utilities Manual - Using the FCA utilities (1.6 MB)
Note
Emulex supports current Solaris x86 systems through an SFS driver, available here.

For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases, contact Emulex Technical Support.