OS Versions: SPARC Solaris 8, 9 and 10 (32-bit and 64-bit)
| Note | This driver version requires patch #112438 for Solaris 8 operation. Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information. |
Compatible HBAs: LPe12002, LPe12000, LPe11002, LPe11000, LP11002, LP11000, LP10000DC, LP10000, LP9802, LP9802DC, LP9402DC, LP9002C, LP9002S, LP9002DC, LP9002L, LP9000, LP8000S, LP8000DC and LP8000
| Driver kit - Base driver, HBAnyware utility 3.4a15, emlxdrv utility 1.00l; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (21.5 MB tar file) |
 |
| Driver Manual - LPFC Driver for Solaris User Manual (1.66 MB) | 
|
| HBAnyware Manual - HBAnyware Utility User Manual (3.5 MB) |
|
| FCA Utilities Manual - Instructions for using emlxdrv (862 KB) |
|
| Note - Emulex supports current Solaris x86 systems through an SFS driver, available through this link. Note - For legacy lpfc drivers that are not listed under Previous Releases, contact Emulex Technical Support. | |