FC Port Driver

Driver Version 2.30a2

Qualification: The FC Port driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The FC Port driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition for the x86 platform. The FC Port driver is Microsoft WHQL qualified for Windows 2000 Server.

For Windows 2000 Server, Service pack 4 is required for cluster configurations.


Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1. More Information

SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.



Compatible HBAs: LP1005DC-CM2, LP10000ExDC, LP1050Ex, LP10000DC, LP10000, LP1050, LP1050DC, LP9802DC, LP9802, LP982, LP9402DC, LP9002L, LP9002DC, LP9000, LP952L, LP8000, LP8000DC and LP850

Read Before You Download


Driver kit Base driver, HBAnyware utility 2.1a16 and elxcfg version 1.41a16 (14,474 KB exe file)
Quick Install Installing the driver using AutoPilot Installer (90 KB)
Manual Installation, Configuration and Troubleshooting (1,526 KB)